Home Resellers
  Digitizing & Measurement Products   
Technical Support > Scanners > Driver & Software Downloads > ScanPlus IV

Driver & Software Downloads  for GTCO CalComp Scanners

 

 
ScanPlus IV 25": S4-625T / S4-825CE / S4-625C / S4-825C / S4-725SX / S4-925SX
ScanPlus IV 36": S4-436MX / S4-436CX / S4-536T / S4-536T Plus / S4-536TX /
S4-536TX Plus / S4-636T / S4-836CE / S4-636C / S4-736C /
S4-736C Plus / S4-836C / S4-936C / S4-936C Plus
ScanPlus IV 40": S4-440T / S4-740CE / S4-740CE Plus / S4-840T
S4-340C / S4-640C / S4-840C / S4-940C / S4-940C Plus
ScanPlus IV 42": S4-742XL / S4-742XL Plus / S4-942XL /S4-942XL Plus
ScanPlus IV 50": S4-450T / S4-850T / S4-350C / S4-650C / S4-850C
ScanPlus IV 54": S4-954C / S4-954C Plus
(C=Color; CE = Turbo w/ Color Enabled; T=Turbo Monochrome)
ScanPlus IV ACS: ACS4600 / ACS4600 Plus
Contact Technical Support  
Register Your Scanner  
 
 
 
 
 
 
 
 

The software on this page may require a password or serial number. Please fill out a short form to request a password for the software you wish to download. Do not use this form to request a serial number—a serial number will not be issued without purchase.


Software

Operating System

Documentation
WIDEsystem Tools 23 contains the WIDEsystem and Scanner Maintenance software installation files along with Operator’s and User’s Guides.

WIDEsystem NET is designed to integrate your wide format scanner with your overall system. It contains the actual drivers that bring your scanner together with Windows. In addition, WIDEsystemNET contains a scanner control interface that lets you monitor your scanning device directly from your Windows interface system tray.

Scan to NET: WIDEsystem NET enables companies to share one or more scanners across its departments no matter their locations. With WIDEsystem NET and compatible NET scan or copy software, a scanner can send scans directly to computers (clients) on the local network or across the internet. WIDEsystem NET contains both SCANserver and SCANclient software modules.

Scanner Maintenance The 3C maintenance system is designed to help you keep your scanner's cameras perfectly aligned, adjusted and calibrated for optimal image quality. Regular scanner maintenance is a sure way to minimize costly downtime. Scanner Maintenance, with the Scanner Maintenance Kit, is very easy to use-most of it is completely automatic-letting you concentrate on your work and take optimal scanner performance for granted.

Note: This software requires that your scanner has the latest firmware and that all scanning software is uninstalled before installation. Older versions of WIDEimage and JETimage may not function properly.

Download WIDEsystem Tools 23: wstools23.exe 
[40.9MB]

Download WIDEsystemNET 3.4: WIDEsystem34-3233.exe  [9.9MB]

Download Scanner Maintenance 2.1.1:
ScannerMaintenance211-3219.exe 
[11.7MB]
 

Windows
98/Me/2000/XP
Operator's and 
User's Guides 
included with 
software.
WIDEimage NET 3.0.7 (Build 13258) (December 2006)

See previous versions of this software for running scanners with other windows OS systems.

In order to run auto size functions, this version requires firmware version 60 or higher (this does not include iJET scanners PUMA HS 36 and COPYmate 18).

This version of the software requires WIDEsystem v. 3.0 or higher.

New in release 3.0.7:
 
Fixed Problem solved with saving changes made in viewer to gray images.
Fixed Problem with Batch Scanning that stopped if autosize failed to detect original's size.

Download: WIDEimage307-13258.exe  [16.4MB]
 

Windows
2000/XP/2003 Server
Help File
[545KB]
WIDEimage NET 3.0.5 (Build 3420) is a fully integrated scanning, viewing, converting and printing system for GTCO CalComp color and monochrome scanners. Its Ultra-fast scan-to-disk capabilities make it the perfect link between your GTCO CalComp scanner and popular software for graphics, reprographics, GIS, CAD, DTP and Archival.

With WIDE image NET software, companies can now share one or more scanners across its departments no matter their locations. The Scan-to-network feature enables you to send scans directly to specific computers set up to receive the image data. This powerful feature lets you distribute and save images directly through your network and through the internet.

Upgrade version for ScanPlus IV and ScanPlus V scanners.

New in release 3.0.5:

Supports ACS4600 new adaptive modes
Fix for wrong colorspace used for some newer scanner models
Long scanner names now shown correctly
Presets enabled for ScanPlus V scanners

Note: This software requires a software serial number. If you do not have a serial number, do not attempt to install this software. A serial number will not be issued without purchase. This software also requires that your scanner has the latest firmware and that WIDEsystem 3.0 or higher is installed.

In order to run auto size functions, this version requires firmware version 60 or higher. (Note: this does not apply for ScanPlus V scanners).

Download: WIDEimage305-3420.exe 
[15.8MB]
 

Windows
2000/XP/2003 Server
Help File
[545KB]
WIDEimage NET 2.9 (Build 2696) is a fully integrated scanning, viewing, converting and printing system for GTCO CalComp color and monochrome scanners. Its Ultra-fast scan-to-disk capabilities make it the perfect link between your GTCO CalComp scanner and popular software for graphics, reprographics, GIS, CAD, DTP and Archival.

With WIDE image NET software, companies can now share one or more scanners across its departments no matter their locations. The Scan-to-network feature enables you to send scans directly to specific computers set up to receive the image data. This powerful feature lets you distribute and save images directly through your network and through the internet.

Upgrade version for S4-925Sx Plus, S4-725Sx, S4-436Cx, S4-942XL, S4-742XL, S4-954C, S4-940C, S4-740CE , S4-936C, S4-736C, S4-536TX, and ACS4600 scanners.

New in release 2.9:

With graytone scan in sRGB, Gamma now defaults to 1.
Color management support with ICC profiles for TIFF and JPEG file formats.
Soft paper handling on scanners supporting this feature.
Auto size detection now works correctly on 25" scanners that only supports center loading.
Now handles scanner standby state correctly.
Now a 'No Clients Registered' entry will appear in the scan to net menus if no clients are registered with the SCANserver.
Batch Scan to Net is now possible
Password is now always checked if scanning to net.
Fixed paper size selection is now remembered when restarting.
Now able to view PDF files when Ghostscript is installed.
Now blocking too high resolutions when the reduction factor is high (ACS only).
Fixed bug that caused a crash when auto-aligning 24bit data with special resolutions
Fixed bug that caused crash when prescanning in BW Copy Adaptive mode with background suppression enabled.
Fixed problem with loading consecutive large file in the viewer.
Fixed bug the caused Scan to net clients to be grayed out if Scan menu was opened during a scan.
Now the extend media handling tab is also visible for one-camera scanners that supports this feature.
On ACS scanners Hollerith based file naming, simultaneously with auto alignment, now gives correct filenames.

Note: This software requires a software serial number. If you do not have a serial number, do not attempt to install this software. A serial number will not be issued without purchase. This software also requires that your scanner has the latest firmware and that WIDEsystem 3.0 or higher is installed.

Download: WIDEimage29-2696.exe 
[8.59MB]
 

Windows
98/Me/2000/XP
Help File
[545KB]
WIDEmail 2.1 is a program designed to automate electronic mailing of scanned wide-format image files. Until now, the common task of e-mailing scanned wide-format images could require that you use up to three different applications, with subsequent disk-saves. With a single press of a button, WIDEmail takes care of scanning, file compression and opens a new e-mail with your image file attached and ready to go. WIDEmail supports all CalComp scanners with One-Touch-Scan buttons and Still-Image-Interface (STI) support on Windows 98 and 2000.

Note: This software requires that your scanner has the latest firmware and that WIDEsystem is installed.

Download: WIDEmail 2.1.exe 
[7MB]
 
Windows
9x/Me/NT 4.0/2000/XP
 
JETimage NET 6.3 (Build 03390) (march 2006)

For optimal performance with your scanner, please upgrade scanner firmware to release 33 or later and calibrate scanner using Scanner Maintenance and the Scanner Maintenance calibration sheet.

NOTE: Before installing JETimage, make sure that you close all applications including WIDEsystem (right click on the WIDEsystem icon in the System Tray and click "exit" ). Requires your previous or purchased serial number for installation.

Important: READ this BEFORE Downloading / Installing JETimage 6.0 or later:  Installing this release of JETimage will overwrite previously installed versions of JETimage BASE. This release allows JETimage NET features for a 30 day trial period. After the trial period, the installation becomes JETimage NET (limited version) until you choose to buy JETimage NET. JETimage NET (limited version) features will only cover single or low-production copying.

Download: JETimage63-03390.exe 
[21.6MB]
 
Windows
98/Me/2000/XP
 
WIDEcapture 1.2 for AutoCAD 2002 - Windows Edition for PC and later. When you install this plug-in software, a new menu item called "Scanned Raster Image" is added to the Insert Menu on your AutoCAD interface. This new option activates a WIDEimage Scan Screen, including the split preview screen and special tool buttons. The scanned image is inserted directly into your AutoCAD workspace, saving you the time and trouble it takes to load the image from a file. The active Wide Format Scanning interface closes down at the end of scan-to-file and your scanned image is automatically loaded into the current drawing in AutoCAD.

This software has the same functionality as the scanning part of WIDEimage software.

For the following Scanners: S4-925Sx Plus, S4-725Sx, S4-436Cx, S4-942XL, S4-742XL, S4-954C, S4-940C, S4-740CE , S4-936C, S4-736C, S4-536TX, and ACS4600.

Note:
This plug-in requires installation of a licensed version of WIDEimage 2.6 or later in order to run properly. No support will be provided for this plug-in—please use at your own risk.

Download: WIDEcaptureForAutoCAD12.exe 
[1.73MB]
 
Windows
9x/Me/NT 4.0/2000/XP
Installation
Instructions

[6.35KB PDF]
WIDEcapture 1.3 for Adobe Photoshop 5.0 - Windows Edition for PC (English version) (Build 2378) and later imports images from your scanner into the Photoshop image editor. You can then use Photoshop's wide range of image manipulation options, just as if you had opened an image file from your hard disk. Install the program in Photoshop's plug-in folder and then just select the application through Photoshop's File menu.

Note:
This plug-in requires installation of a licensed version of Adobe Photoshop 5.0 or later in order to run properly. No support will be provided for this plug-in—please use at your own risk.

Downloads:

WIDEcapture13.exe  [2.33MB]
 
Windows
98/Me//2000/XP
User's Guide
[972KB PDF]


CADimage/SCAN, CADimage/SCAN+Feature, WIDEimage and JETimage are copyrights of Contex/AS.



 
© GTCO CalComp, Inc.                                                                                          Site Map  |  Legal Information  |  Web Site Comments Only