A. Before setup

    1. Prior to using these instructions, the Digitizer should be working on the desktop in Windows 95/98/NT.

B. Setting up the tablet

    1. Pick the "TOOLS" pull-down, Choose "OPTIONS"

    2. Pick the "SYSTEM" tab,

    3. Under "Current Pointing Device" Choose: "WINTAB COMPATIBLE DIGITIZER ADI 4.2 BY AUTODESK"

    4. In this same dialog box, in the area titled: 'Accept input from:'

    5. Choose: "DIGITIZER AND MOUSE"

    6. Choose: "OK"

    7. You now have AutoCAD 2000 Configured for the Digitizer. You can now use the Tablet Command to set-up (CFG)
        the AutoCAD template or Calibrate the board.