Installing and Removing TabletWorks in Macintosh

NOTE:  The TabletWorks driver is compatible with MAC O/S 7.x and later.  Do not install this driver if you do not have at least Mac O/S 7 on your computer.

1.  Installing the TabletWorks Driver

NOTE:  If you are using a TabletWorks CD-ROM, skip to step B.

  A.  Installing from a downloaded file.

    1.  Double-click on the "Calcomp TabletWorks" icon.

    2.  Double-click on the "TabletWorks Installer" icon.

    3.  Click on the "Continue" button on the TabletWorks Splash
        screen.

    5.  Click on the "Continue" button after reading the install note.

    6.  Select the brand of tablet you are using and click the "Install" button.

    7.  This installation requires you to restart your computer after installation.  Click "Continue" to install or "Cancel" t
         abort.

    8.  You will be prompted to restart your computer.  Click on the "Restart" button.

NOTE:  After your system restarts, if you are using a Summagraphics tablet, you will be prompted to select your tablet model and pointing device.
   

  B.  Installing from the TabletWorks CD-ROM

    1.  Insert Tabletworks CD into CD-ROM drive.

    2.  Double-click on the "Calcomp TabletWorks" icon.

    3.  Double-click on the "TabletWorks Installer" icon.

    4.  Click on the "Continue" button on the TabletWorks Splash
        screen.

    5.  Click on the "Continue" button after reading the install note.

    6.  Select the brand of tablet you are using and click the "Install" button.

    7.  This installation requires you to restart your computer after installation.  Click "Continue" to install or "Cancel" to
         abort.

    8.  You will be prompted to restart your computer.  Click on the "Restart" button.

NOTE:  After your system restarts, if you are using a Summagraphics tablet, you will be prompted to select your tablet model and pointing device.

  C.  The installation will be complete when the system restarts.



2.  Removing the TabletWorks Driver

  1.  Double-click on the "Hard Drive" Icon corresponding to the hard drive on which TableWorks is installed.

  2.  Double-click on the "System Folder" icon.

  3.  Double-click on the "Control Panels" icon.

  4.  Click and Drag the "TabletWorks Control Panel" icon to the Trash. ("TabletWorks-Summa" for Summagraphics
       users)

  5.  Double-click on the "Preferences" icon.

  6.  Click and Drag the "TabletWorks Prefs" icon to the Trash. (This step only applies if you have altered the
       TabletWorks Control Panel settings from the default settings.)

The TabletWorks driver is now removed from your computer.  Restart your computer.